Before Use - JB Systems Plano Spot 7TC Manual De Instrucciones

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device was designed to produce decorative effect lighting and is used in light show systems.
 Super compact RGB LED-projector containing 7pcs high power RGB 3Watt LEDs
 Same functionality and form factor as Plano Spot based on 5mm but much brighter!
 Beam angle = 25° (medium spot)
 Many applications possible: Discotheques, DJs, exhibition booths, homes, ...
 Can be fixed in ALU-truss like any standard LED PAR, using a standard clamp
 Can be used as floor projector, under any possible projection angle
 Super compact housing, perfect for hiring companies!
 Very smooth RGB color changes thanks to high freq. dimming electronics
 Different working modes:
 Standalone: custom colors selectable or automatic and beat synchronized color changes
 Master/slave mode: up to 16 units can be used together for wonderful preprogrammed, music
synchronized lightshows. (optional CA-8 controller possible)
 DMX-controlled: 4modes, 4channels (R, G, B + Dimmer/strobe/sound chase)
 Controlled by LEDCON-02 DJ-controller
 Different ways to set DMX start address:
 Fast remote DMX addressing using any standard DMX-controller.
 In master/slave mode you can address all units automatically.
 IEC mains in/outputs: easy daisy chaining of several units.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the packing contains the following items:
 Operating instructions
 PLANO SPOT 7TC
 Hanging bracket
 2 Knobs to fasten the hanging bracket
JB SYSTEMS
®
®
product. To take full advantage of all possibilities and for your own
1/65
OPERATION MANUAL
PLANO SPOT 7TC