Viking RescYou Conquest PV9273 Manual Del Usuario página 9

VIKING RescYou
3. Gasket (2) under the CO
and discarded. Insert a new gasket in the inflator (5).
Place it right at the bottom of the inflator.
4. Screw the CO cylinder (1) tightly onto the inflator (5)
2
by hand.
4.5 REPLACEMENT OF CO
Please see enclosed instructions from Hammar.
5. SPARE PARTS
Please contact a certified VIKING servicing station.
Find your nearest servicing station on www.VIKING-life.com.
6. STORAGE
We recommend that the lifejacket is stored in a dry place
at temperatures not below zero, possibly on a peg in a
wardrobe. Unintended inflation can occur. This may be due to a
combination of moisture and vibration. The risk will be reduced
if the recommended service interval is observed.
7. APPLICATIONS AND LIMITATIONS
VIKING RescYou is designed for yachting and working
TM
purposes within the shipping and offshore industry.
The lifejacket has been tested in water temperatures ranging
from 0°C to 30°C. At water temperatures below zero,
automatic inflation can be delayed. If so, manual release is
required.
Never wear other clothing or a harness over the lifejacket. If
worn together with an immersion suit or any special clothing
such as sailors' wear with buoyancy, the functioning of the
lifejacket can be affected. Thus the capability of turning an
unconscious person can be reduced.
Please note that a lifejacket fitted with Hammar inflators only
inflates automatically when submerged in water deeper than
10 cm.
Conquest & VIKING RescYou
TM
cylinder must be removed
2
CYLINDER - HAMMAR INFLATOR
2
Atlantic
TM
EN
11