Installing The Heat Sink - Dell OptiPlex 3080 Micro Manual De Servicio

Steps
1. Loosen the three captive screws that secure the heat sink to the system.
NOTE: Loosen the screw in the sequential order (1,2,3) as printed on the heat sink.
2. Lift the heat-sink from the system board.

Installing the heat sink

Prerequisites
Si va a reemplazar un componente, quite el componente existente antes de realizar el procedimiento de instalación.
About this task
The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.
38 Desmontaje y reensamblaje