Clock Button - Giatsu RA1A Manual De Usuario

Buttons on remote controller

CLOCK button

Press this button to set clock time. "
Press "+" or "- "button within 5s to set clock time. Each pressing of "+" or " -" button,clock
time will increase or decrease 1 hour. Press this button again, "
remote controller will blink. Press "+" or "- "button within 5s to set clock time. Press this
button another time, "
"- "button within 5s to set clock time. If hold "+" or "-" button, clock time will change quickly.
Release when reaching your required time. Press "CLOCK " button to confirm the time,
" " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can't exceeds 5s. Otherwise, remote controller will quit setting
status. Operation for TIMER ON/TIMER OFF is the same.
TIMER ON button
This button can set the time for timer on. After pressing this button, "
"ON" and "
set "TIMER ON" time.Each pressing of "+" or " -" button,the time will increase or decrease
1 hour. Press this button again, "ON"and "
Press "+" or "- " button within 5s to set the time. Press this button another time, "ON" and
" " icon on remote controller will blink. Press "+" or "- " button within 5s to set the
time. Hold "+" or " -" button, the time will change quickly until reaching your required time.
Press "TIMER ON" to confirm it.The word "ON" will stop blinking."
displaying.
Cancel TIMER ON
In condition of TIMER ON is started up, press "TIMER ON" button to cancel it.
TIMER OFF button
This button can set the time for timer off. After pressing this button, "
"OFF" and "
"TIMER OFF" time.Each pressing of "+" or " -" button,the time will increase or decrease
1 hour. Press this button again, "OFF"and "
Press "+" or "- "button within 5s to set the time. Press this button another time, "OFF" and
" " icon on remote controller will blink. Press "+" or "- "button within 5s to set the
time. Hold "+" or " -" button, the time will change quickly until reaching your required time.
Press "TIMER OFF" to confirm it.The word "OFF" will stop blinking. "
displaying.
Cancel TIMER OFF
In condition of TIMER OFF is started up, press "TIMER OFF" button to cancel it.
"and "
" icon on remote controller blinks. Press "+" or "- "button within 5s to
" icon on remote controller blink. Press "+" or "- "button within 5s to set
"and " " icon on remote controller will blink.
" icon on remote controller will blink. Press "+" or
" icon on remote controller will blink.
" icon on remote controller will blink.
8
"and " "icon on
" icon disappears,
" icon resumes
"icon disappears,
" icon resumes