Emptying The Dust Box - Mellerware Whooshy! Manual Del Usuario

ESPAÑOL
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all products'
–
packaging has been removed.
VACUUMING FUNCTION
Fit the hose unit to the vacuum
–
cleaners air intake.
To disconnect the hose unit from
–
the vacuum cleaner, press the
button to disconnect the tube from
the main body where is situated in
the rear side. (Fig.1).
INSERTION OF ACCESSORIES INTO
THE APPLIANCE'S GRIP
The appliance's grip is designed
–
in such a way that it allows
the insertion of the following
accessories (use the combination
that best meets your requirements):
Extendible tube: designed to
–
provide access to surfaces which
are out of reach and make floor
cleaning comfortable.
Head: specially designed for
–
cleaning floors (both rugs and
carpets and hard floors).
Lance: specially designed for
–
getting into cracks and difficult
corners.
Multi-use brush
–
USE
Take the length of cable required
–
out of the housing.
Connect the appliance to
–
the mains.
Turn the appliance on, by using the
–
on/off button.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
Turn the appliance off using the on/
–
off button.
Unplug the appliance from
–
the mains.
The cable housing means you can
–
remove and have available the
required length of cable for working
with the appliance, preventing
accident risk situations.
Cleaning
Disconnect the appliance from the
–
mains and allow it to cool before
undertaking any cleaning task.
Clean the equipment with a damp
–
cloth with a few drops of washing-
up liquid and then dry.
Do not use solvents, or products
–
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
Never submerge the appliance in
–
water or any other liquid or place it
under running water.

EMPTYING THE DUST BOX

Empty the dust box when it is
–
full (observation facilitated by
transparent windows), or when
vacuuming power is notably
reduced.
EN ES