On-Wall Mounting - Intermatic Grasslin thermio essential H Srf Manual De Instrucciones

Installing the housing base
4. Attach the housing base to the flush-mounted socket with screws (3.5 x 25 mm) (Fig. 8).
Closing the housing
5. Snap the housing cover onto the housing base and tighten the screw on the device housing with
the Phillips screwdriver.

ON-WALL MOUNTING

Personal:
• Qualified electrician
Preparing for installation
1. Mark the hole pattern from the wall mounting housing onto the wall and drill holes at the points you
marked (5 mm diameter and at least 25 mm deep).
2. Insert the wall-plugs provided into the holes.
60