Intermatic Grasslin thermio essential H Srf Manual De Instrucciones página 70

4. Press the top button (Fig. 1/4) to increase the value or the bottom button (Fig. 1/7) to decrease the
value.
5. Press the radio communication button (Fig. 1/11) to save the room code or wait five seconds until
the display switches to the current temperature.
Setting up the DIP switch on the actuator (receiver)
1. Press and hold the ON/OFF button (Fig. 2/2) for five seconds until the LED lights up green.
The actuator (receiver) is connected to the room thermostat (transmitter) and the radio com-
ð
munication LED (Fig. 2/4) flashes blue.
70
The room code that can be set on the room thermostat is in the range 00 –
16 and must match the DIP switch setting on the actuator.