V2 DEV-R2 Manual Del Usuario página 10

NOTE: the functioning logic of the LIGHT key is only available
on models PROTEO1, PROTEO4 and DEV-R2 from version 1.1
onwards.
MONOSTABLE operating logic
Button status Output NOT active Output active
Activates the output
LIGHT
-
BISTABLE operating logic
Button status Output NOT active Output active
Activates the output
LIGHT
-
TIMER operating logic
Button status Output NOT active Output active
It activates the
output and starts
the timer
LIGHT
-
PROGRAMMING THE OPERATING LOGICS
THROUGH THE SW1 BUTTON (FIG.3)
L1 - the LED lights up when the SW1 button is pressed to store
or delete any transmitters
L2 - the LED lights up when the DEV-R2 module receives a code
existing in memory
-
MONOSTABLE operating logic
• Power the DEV-R2 module
• Hold the SW1 button pressed: the L1 LED lights up
Disables the
• After 5 seconds the L1 LED goes off: release the SW1 button
output
• After 2 seconds the L2 LED lights up
• Press the SW1 button: the L2 LED goes off, indicating the
procedure is over
BISTABLE operating logic
• Power the DEV-R2 module
Disables the
• Hold the SW1 button pressed: the L1 LED lights up
output
• After 5 seconds the L1 LED goes off: release the SW1 button
• After 2 seconds the L2 LED lights up
• After 2 further seconds the L1 LED lights up
-
• Press the SW1 button right away: the L1 and L2 LEDs go off,
indicating the procedure is over
TIMER operating logic
• Power the DEV-R2 module
• Hold the SW1 button pressed: the L1 LED lights up
• After 5 seconds the L1 LED goes off: release the SW1 button
It reloads the
• After 2 seconds the L2 LED lights up
timer
• After 2 further seconds the L1 LED lights up
• After a few seconds the 2 LEDs go off and L1 starts blinking:
-
the number of blinks corresponds to a time you can set as
shown in the table:
N° Flashing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
• Count the number of L1 LED blinks corresponding to the time
you wish to set
• Press the SW1 button during the desired blink: the L1 LED goes
off, indicating the procedure is over
- 10 -
Time N° Flashing
01 sec. 16
02 sec. 17
03 sec. 18
04 sec. 19
05 sec. 20
06 sec. 21
07 sec. 22
08 sec. 23
09 sec. 24
10 sec. 25
11 sec. 26
12 sec. 27
13 sec. 28
14 sec. 29
15 sec. 30
Time
30 sec.
1 min.
1,5 min.
2 min.
2,5 min.
3 min.
3,5 min.
4 min.
4,5 min.
5 min.
10 min.
15 min.
30 min.
45 min.
60 min.