Descargar Imprimir esta página

Chamberlain MotorLift GWAP120 Manual De Instalación página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
Control panel description:
OPEN
LED
Max. shutter size
(shutter size = length x width):
Plastic-Mini- Profiles approx. 4m²
Aluminium-Mini-Profiles approx. 2.5m²
Plastic-Maxi-Profiles approx. 2.5m²
INSTALLATION:
The motor replaces mechanical surface mount strap coilers with strap widths of max. 18mm.
Permitted strap length is max. 4.0m with a strap thickness of 1.2mm.
For shutters (without mechanical gear) with plastic profiles up to approx. 4m².
Check shutter construction regarding proper operation. The shutter must open and close easily
when used manually. The strap must not be frayed; the shutter must not be wedged. Exchange
defective parts.
CLOSE
RESET
24h TIMER
Included in delivery:
• Electrical surface mount strap coiler
- pivoting at 180°
• Plug with approx. 1.4 m of power cable
• Operating instructions
Hardware required:
• Pen
• Metering rule
• Scissors
• Screw driver
• If necessary: drilling machine
Technical data:
Item Nº: GWAP120
Supply voltage: 230V AC / 50Hz
Operating voltage: 24V
Pulling force approx. 12kg / 120N
Torque: 1.2Nm
Operating power: max 35W
Standby: <0.2W
Strap width: >18mm
Strap capacity approx. 4.0m with strap thick-
ness of 1.2mm
Short time rating: max 5min
Protection class II (only use in dry areas)
Power cable H05 VV-F 2 x 0.75
Material recyclable
Tested according to EN 60335
Certificates LGA/GS, CE
709156-2GB

Publicidad

loading