Giatsu RA1A-WIFI Manual De Usuario página 33

Smart APP User Guide
5. Add Air Conditioner
5.1 Please find the operating steps and method about
download APP in Chapter 1 for detail.
5.2 Add Air Conditioner.
5.3 Complete the following steps to register for Android
system:
Smart Module configuration:
● Connect the mobile phone with wireless router, turn
on the power of the air conditioner, press "
of the remote controller to start the Wi-Fi configuration.
● Press "add Air Conditioner" in the APP, chose
"No/ Don't know" if it is the first start.
● Please follow the instruction in Chapter 6, point 1 To
add air conditioner, if it has been connected to Wi-Fi
hotspot.
● Follow the interface instruction, long press the "
button of the remote controller for 2 seconds, the air
conditioner will enter configuration mode if the following
three phenomena appear at the same time:
◆ After long beep sound from air conditioner, and there
will be another short beep sound.
◆ Air conditioner will display "A2" for 3 seconds.
◆ The Wi-Fi indication light will blink once every
second on air conditioner panel.
"button
L C
TIMER T
Does your air-conditioning has been
"
L C
TIMER T
please long press the AC remote
control about 2 seconds toward
AC,When hear a long and a short
beep,The AC enters configuration
state.
12
Distance ≤ 8m
L
21:09
connected to the netword yet?
Yes
Yes
No/Don't know
No/Don't know
Enter Home Enter Home Enter Home
21:09
Next
Next
C
TIMER T