Giatsu RA1A-WIFI Manual De Usuario página 39

Smart APP User Guide
8.3 How to add air conditioner on APP
Please find the operating steps and method about add air conditioner in Chapter 5 or 6
for detail.
8.4 How to delete the air conditioner on APP
test AC
Add AC
Service
Setting
Version
8.5 APP software upgrading method
Press current version in menu, enter
the version update and description
page, and choose to upgrade the APP
according to the content page.
8.6 Air Conditioner Wi-Fi indication light quick blinking (Blink once every 1 second) .
The Wi-Fi module is being configured, see point 5 for more details.
8.7 Air Conditioner Wi-Fi indication light slow blinking (Blink once every 10 second)
When the Wi-Fi indication light blinking once every10 second, the communication
connect ① or ② in Figure 8.1 is failure.
Please check whether the router and network are normal and the password is correct.
It is recommended that you use a mobile phone to connect the router, to determine
whether it can be connected to the Internet. Please add air conditioner again if the router
is normal.
If you confirm the connection of router's SSID & password are correct, the air conditioner
and mobile phone are all proper functioning, please re-start the air conditioner after
power cut, re-start the router, re-start APP from the phone to try to connect again.
21:09
slide to the right side
test AC
Add AC
123(1)
C C
Service
Setting
Version 123(1)
21:09
Service
Service
Setting
Setting
Version 123(1)
Version
21:09
Service
Service
Setting
Setting
Version 123(1)
Version
18
Delete
21:09
Upgrade management
123(1
21:09
Upgrade management
123(1