Giatsu PREMIUM R32 GIA-DI-18PRER32 Manual De Usuario E Instalacion página 39

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Safety Precautions
When the running modes of the indoor and outdoor units
conflict, it will be indicated on the display of the wired controller
in five seconds and then the indooor unit will stop. In this
case, they can back to the normal condition by harmonizing
their running modes: the cooling mode is compatible with the
dehumidifying mode and the fan mode can go with any other
mode except the heating mode. If the supply power fails when
the unit is running, then the indoor unit will send the "start"
signal to the outdoor unit three minutes later after power
recovery.
During installation, the communication cable and the power
cord must not be twisted together but instead separated with
an interval of at least 2cm, otherwise the unit is likely to run
abnormally.
This appliance is not intended for use by persons(including
children) with reduced physical,sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not paly with the
appliance.
The appliance shall be installed in accordance with national
wiring regulations.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Premium r32 gia-di-24prer32Premium r32 gia-di-36prer32

Tabla de contenido