Publicidad
Brake Control Wiring Harness
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Locate the vehicle's OEM brake control connector
under the dash, taped to another
vehicle harness near the
emergency brake pedal. The
connector will be similar to that
found on the Brake Control Wiring
Harness and designed to mate with
it (Fig. 1). Refer to the vehicles
owners manual for additional
information in locating this
connector.
3. Connect the Brake Control Harness wires to the
wires on the Electric Brake Control (not supplied) in the
following manner by using the butt connectors (provided):
Adapter
Black
White
Red
Blue
Caution: The above referenced brake control wire
colors are for reference only. Verify the correct
wire colors for your electric brake control by
Brake Control
Black
White
Red
Blue
Function
12v (+)
Ground (-)
Brake Signal from Vehicle
Brake Power to Trailer
Fig. 2
Publicidad
