Publicidad
Step 7
Fasten the remaining BACK (G) to the lower portion of your unit
å
using the NAILS (4). The NAILS should be approximately 5" apart,
1-1/2" from the corners, and 1/4" in from the long edges and short
edge along the BOTTOM (E).
NOTE: The bottom edge of the BACK (G) should be even with the
å
bottom surface of the BOTTOM (E).
NOTE: The lower BACK will overlap the upper BACK.
å
Use the remaining NAILS (4) to fasten the upper and lower
å
BACKS (G) to the center of the FIXED SHELF (D).
The lower BACK
overlaps the
D
upper BACK.
416439
G
D
1-1/2" 1-1/2"
5"
1/4"
www.sauder.com
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
(28 used in this step)
The lower BACK will
overlap the upper BACK.
G
5"
1/4"
4
NAIL
E
The edge of the BACK (G)
should be even with the bottom
surface of the BOTTOM (E).
Page 11
Publicidad
