Product Overview; Intended Use - Philips 989803174501 Instrucciones De Uso

Product Overview

Intended Use

Philips ECG Adapters allow care providers to connect Philips ECG
leadsets to non-Philips ECG trunk cables. This enables a patient's ECG to
be monitored via Philips electrodes/leads that are connected to OEM
(Other Equipment Manufacturer) monitors.
Adapter use is limited only by:
• Compatibility with specific OEM trunk cables.
• Indications for use of the OEM monitors connected at the opposite end
of the OEM trunk cable.
Product Description/Application
The Philips series of ECG Adapter products offer compatibility with
several OEM trunk cable manufacturers. Refer to Compatibility for
specific Leadset-Adapter-Trunk connection options.
The Adapters are reusable and suitable for multi-patient use when cleaned
and disinfected between patient applications.
A typical Leadset-Adapter-Trunk connection is shown on page i at the
front of this document and described below:
The Adapter has a female end that accepts a compatible 5-lead Philips ECG leadset
connector, and a male end that connects to a compatible OEM trunk cable connector.
The Philips ECG Leadset Connector connects to the leadset end of the Adapter.
The OEM Trunk Cable Connector connects to the trunk end of the Adapter.
Multiple ECG Patient Leads on the Philips leadset attach to ECG electrodes appropriately
positioned on the patient.
The OEM Trunk Cable Monitor Connector connects to an OEM patient monitor.
The Adapter's Tether Strap secures the Adapter to the strain relief on the OEM trunk cable
connector.
Stryker Internal Control No.: EL10052 Rev C
1