Dörr DRL-232 LED Manual De Instrucciones página 7

3.1
1 4
3.2
1
4
5
3.3
1
4. installation
4.1 insertion of Batteries
• Open the battery compartment lid of the battery box, (3.3.1), by sliding it into the direction of the arrow.
• Insert 6 AA batteries or rechargeable batteries of the same type into the battery Box.
Respect the correct plus/minus order.
• Close the battery compartment lid by sliding it against the direction of the arrow.
3
2
2
3
6
2
3. noMenclature
3.1 control unit
1. main Switch on/oFF
2. Flash Shoe with Locking Ring
3. Dimmer
4. Release Knob for Battery Box
3.2 ring light
1.+2. Unlock Keys for Adapter Ring Mount
3. adapter Ring mount
4. Socket ¼"
5. Hinged bracket with ¼" tripod screw and fl ash shoe
6. adapter Rings Sizes Ø 52, 55, 58, 62, 67, 72, 77 mm
3.3 Battery Box
1. Battery Box for 6 Mignon AA Batteries
(batteries optional)
2. Battery Contacts
4.2 attachment of the Battery Box to the control unit
Place the battery Box on the control unit as shown on the
sketch. Press the battery Box downwards, until it clicks
closed. Then slide the battery Box towards the battery
contacts. For removal of the battery box, press the re-
lease knob (3.1.4.) and slide the battery Box backwards.
Note: Alternatively, a Li-Ion battery Box type Sony
NP-F550, Item no. 980075 is optionally available. It will
improve both coverage and cost eff ectiveness.
7