Cleaning And Maintenance; Bulb Replacement - MiLECTRIC FRV-265 Manual De Usuario

CLEANING AND MAINTENANCE

Do not use abrasive cleaning agents or solvents.
1. Disconnect the mains plug from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning reconnect and adjust t he temperature control knob as desi red.
6. Put the food back into the appliance.

Bulb replacement

The LED lights in the fridge cannot be replaced by the user.
If the LED lights stop working, please contact the local authorised service
agent.
Cleaning Tips
R
•
emove all shelves, door shelves, vegetable containers, removable
accessories (such as egg tray and ice cube tray if included) and/or
drawers from the appliance. ash them in warm soapy water with a soft
R
sponge. inse and dry thoroughly.
W
•
ipe the interior parts (including door switch, temperature control knob
and lamp cover) with a damp cloth soaked in a mixture of warm water
and dishwashing liquid. or stubborn stains, use baking soda.
W
•
ipe down the doors, including edges, with a microfiber cloth
dampened with a mild dishwashing liquid and water. se a wet sponge
and soft brush (such as toothbrush) to remove any stuck-on food.
W
F
EN-13
U