Kohler K-6138 Guia De Instalacion página 7

Install and Level the Sink
Move the sink base to its installation location. Mark the location of each foot peg onto the floor.
Using a ¼" drill bit, drill holes at the installation location of each leg.
Move the sink base to its installation location. Verify all the foot pegs seat fully into the holes in the
floor.
CAUTION: Risk of personal injury or product damage. Large cast iron sinks are very heavy. Get
help when lifting the sink.
Align the corner bosses of the sink with each of the legs.
Carefully lower the sink onto the stand.
Tighten the hex cap screws, tightening opposite corners evenly until all are hand tight.
Using the leveling feet, level the sink. Turn the feet clockwise to raise the sink, or counterclockwise
to lower.
Kohler Co.
Raise
7
Lower
1114139-2-A