Master audio SM SERIE Manual De Usuario página 16

Amate Electroacústica,s.l.
Fig.2. SM-12D8 as floor monitor
2.2. Connectors' panel
A) BALANCED INPUT: XLR balanced input signal
1= Shield 2= Live 3= Return
B) LINK: XLR connector used for paralleling several units, which will share the
same input
1= Shield 2= Live 3= Return
C) AC MAINS: AC PowerCon input signal.
D) AC LINK: PowerCon output connector to feed a secondary cabinet.
E) POWER ON: Lights when AC input is correct.
F) LIMITER: Prevents the amplifier outputs from overdriving the transducers. When
the limiters are activated, they change to red colour. The LIMITER indicator can blink
occasionally, but if it blinks frequently or lights continuously, turn down the level
control until the LIMITER indicator only blinks occasionally.
Fig.3. SM-12D8 panel
SM Series.Ver 1.0 Dec 08
16