Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill opening
3. Dry/steam selector
4. Spray button
5. Temperature ready light
6. 360° pivoting cord
7. Fabric guide
8. Heel rest
9. Water tank
10. Fabric select dial
11. Nonstick soleplate
J
J
K
K
J
L
L
Symbols
K
Dry
M
M
a
Steam
L
O
Spray
O
M
O
How to Use
This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the
iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through
a home softening system.
g
Important: For optimum performance, let the iron stand for 90 seconds
before beginning to iron.
FILLING WATER TANK
. Tilt the iron and using a clean measuring cup, pour water
into opening until the water reaches the MAX level mark on
the water tank (A). Do not overfill. Refill as needed.
. Plug in the iron. Temperature ready light glows when iron
has reached set temperature setting.
Tip: If unsure of a garment's fiber, test a small area (on an
inside seam or hem) before ironing.
A
STEAM IRONING
. Move the dry/steam selector to the desired steam level (B).
B
. Turn the fabric select dial to appropriate setting (between
b
and 6) for your fabric (C). See fabric guide on the heel
rest and read garment's label to help you determine fabric
type. The temperature ready light glows until it reaches the
appropriate temperature. It then cycles on and off during
ironing.
C
. When finished ironing, turn the fabric select dial to lowest
heat setting, move the selector to
Stand the iron on its heel rest and allow it to cool off.
a
b
Important: Always stand the iron on its heel rest when powered on but not
in use.
J
K
L
and unplug the iron.
M
O
5
Publicidad
Tabla de contenido
