How To Use; Filling The Water Tank; Using Your Iron - Black and Decker Elite digital PRO Serie Manual De Uso Y Cuidado

GE T T I N G TO K NOW YO U R
PR O FE SS I O NA L ST E A M IR O N





Product may vary slightly from what is illustrated.
4
1. Spray nozzle
2. Water-fill cover
3. Burst of steam
button

4. Spray mist button
5. 360˚ pivoting cord
6. Diamond-infused
soleplate

7. Steam/Auto clean slider:
High steam, Low steam,
 No steam, Auto clean
8. Maximum

water level mark
 9. Fabric/Temp. button
10. Fabric/Temp. display

11. Water tank
12. Heel rest

synthetic
nylon or silk
polyester
blend
wool
cotton or linen
off
HOW TO U SE
This product is for household use only.
G E TT I N G START E D
• Remove all labels, tags and stickers attached to the body, cord, or
soleplate of the iron.
• Remove and save literature.
• Please note that water droplets may still be visible in the tank at the time
of purchase. This is from the individual quality tests done to ensure that
every iron meets our high standards for product performance.

FILLING THE WATER TANK

1. Tilt the iron and using a clean measuring cup,
pour water into opening until the water reaches
the MAX level mark on the water tank. (A)
Do not overfill.
2. Close the water-fill cover securely.
3. Stand the iron on the heel rest.
4. To refill at any time during the ironing process,
unplug the iron and follow the above procedure.

USING YOUR IRON

1. Plug the iron into an outlet. The Fabric/Temp. display defaults to
an OFF setting.
2. Read the manufacturer fabric labels for material content and
clothing care recommendations to help select
the correct temperature and steam settings.
3. To select the temperature on the iron, press the
Fabric/Temp. button. (B) Scroll through the
setting options on the Fabric/Temp. display until
reaching the desired fabric setting.
4. The setting you selected will blink while the
iron is heating. Once the iron has reached the
selected temperature, the light will stay on and
no longer blink.
5. To dry iron (iron without steam), it is not
necessary to empty the water tank; simply move
the Steam/Auto clean slider (C) to the Dry Iron
setting . The following fabric heat settings
should be used without steam: synthetic, nylon,
silk, and poly.
A
B
C
5