Safety Notice - Motorline 60 Manual Del Usuario

Garage Door Opener 60 / 100 / 120
English
IMPORTANT:
Before starting to install the opener, read this entire instruction manual carefully.

SAFETY NOTICE

The garage door opener described in this manual is designed for the automation of sectional overhead doors. Any
other use is considered improper and will void warranty
WARNING: you are carrying out operations on machine system classified in the automatic gates and doors
category and as such failure to comply with the relevant safety rules may result in personal injury and/or property
damage.
Only qualified technicians should install and give assistance to the equipment. The installer has the responsibility to
adhere to safety standards.
Unqualified personnel or those who do not know the occupational health and safety standards applicable to
automatic gates and doors category must under no circumstances carry out installations or implement systems.
The person who installs or services the equipment without observing all the applicable safety standards will be held
responsible for any damage, injury, cost, expense or claim whatsoever suffered by any person as a result whether
directly or indirectly from failure to install / assist the system correctly.
DESCRIPTION
The operator 60 / 100 / 120 requires a power supply AC230V 50Hz and has a 24V DC motor. When the motor is
running, the operation can be stopped by using the following devices (pull the string manually, command button,
photocells and wall button, if installed). An encoder serves to define opening and closing positions and also the
slowdown at the end of the course making it smooth and precise.
A radio receiver with frequency 433.92Mhz is installed in the Control unit and transmitter is coded through the
self-learning technique. As an alternative to the built-in receiver, it is possible to install receivers from others brands
and with different working frequencies by respecting wiring diagram.
The unit has been designed to provide maximum reliability,safety and use flexibility.
The auxiliary output for feeding external photocells or receivers is capable of powering whose consumption does
not exceed 250mAh.
Pág. 17