Handset Registration - GE 21025 Guía De Uso

1. Make sure the handset is at the main menu. Make sure your phone is
OFF (not in TALK mode).
2. Press the mute/program button until SET TONE/PULSE 1TONE 2PULSE
shows in the display.
3. Use the touch-tone pad on the handset to select 1TONE or 2PULSE , or
press the cid/vol (
setting is 1TONE .
NOTE: Press the exit/answerer button to keep the previous setting and return
to the main menu screen.
4. Press the mute/program button to save your selection, and return to the
main menu. You will hear a confirmation tone.
NOTE: If you aren't sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
H R
ANDSET EGISTRATION
TIP: During the registration process, keep your handset near the base
when it displays the following:
You should register a handset to the base when the following shows in
the display:
16
SET TONE / PULSE
1 TONE 2 PULSE
or ) button to scroll to your selection. The default
TONE
OUT OF RANGE