Caller Id Solutions - GE 21025 Guía De Uso

Charge indicator on the base flashes
• Provided your phone company offers voice message service and you
subscribe to it, the charge indicator on the base flashes when the phone
is not in use to indicate there is a message waiting. It stops flashing
after the message has been reviewed.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and
cordless handset
• Unplug the AC power converter from the wall outlet and the back of
the base/charge cradle. Remove the handset battery. Wait for 30
seconds and plug the power adapter back into the base/charge cradle
and wall outlets. Reconnect the battery and charge for 16 hours. Re-
register the handset.
C ID S
ALLER OLUTIONS
No Display
• Charge or replace the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power converter from the base/charge cradle and
reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid
Caller ID information during the silent period after the first ring. This
message indicates the presence of noise on the line.
No Caller ID
• You must be subscribed to Caller ID service from your local telephone
company to receive Caller ID records.
53