Cleaning And Care - oneConcept 10031517 Manual Del Usuario

Modes and Functions
POWER Turn the FAN on by pressing the 'POWER' button; Turn the FAN off by pressing the
'POWER' button again.
SPEED You can adjust the fan speed to the desired level: low (I), medium (II), or high (III)
by pressing 'SPEED'. The speed setting is displayed on the LED panel.
MODE Pressing the 'MODE' button will set the FAN into NORMAL (NM), NATURAL (NT), and
SLEEP (SL) mode.
TIMER The fan is equipped with a timer that allows you to set it's length of operation from
0.5 hour to 7.5 hours.
OSC Pressing the 'OSC' button will start and stop the oscillation function. The symbol is
displayed on the LED panel.
Display and Indicator Lights
• This can only be done by an authorized service agent such as your local Sealer dealer or
any agent qualified to undertake electrical repairs.
• If the unit requires external cleaning make sure it is switched off and unplugged from the
mains supply. Use a soft tissue or cloth for general cleaning. To remove more persistent
dirt or grime wipe down with a cloth that has been dampened with warm soapy water. Do
not use any solvents ( such as thinners ) as these may damage the plastic casing.
10

Cleaning and Care