Importante Product Checking - Anest Iwata W-200 INTEGRA 2 SP Serie Manual Del Usuario

Ocultar thumbs Ver también para W-200 INTEGRA 2 SP Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
W-200 INTEGRA_ PRESSURE and SUCTION SPRAY GUNS
WARNING
PROTECTION OF HUMAN BODY
ALWAYS WEAR PROTECTIVE GEAR (safety glasses, mask, gloves.) If not, clean-
ing liquid, etc., can cause inflammation of eyes and skin. In case of any physical
discomfort for skin or eyes, immediately seek a medical advice.
WEAR EARPLUGS IF NECESSARY. The noise level of ANEST IWATA Spray
Gun doesn't exceed the 85 dB (A) A-weighted sound pressure value about
the risk of daily exposure to noise. THE USE OF INDIVIDUAL HEARING
PROTECTION IS ALWAYS RECOMMENDED, because the terms of use and
the influence of other noises in the job area, could increase the average
value allowed.
NEVER TRY TO STOP LEAKS BY HAND, WHEN PAINT LEAKS.
In case of leaks, stop pump immediately and reduce paint pressure down to 0
pressure. If you feel any abnormality or receive any injury, consult a medical
doctor immediately.
Pulling trigger many times during operation, may cause carpal tunnel syndrome.
ALWAYS REST, IN CASE OF TIREDNESS.
WARNING
IMPROPER USE OF THE EQUIPMENT
NEVER EXCEED MAXIMUM OPERATING PRESSURE AND MAXIMUM
OPERATING TEMPERATURE. Use at more than Max. Operating Pressure can
cause explosion of Spray Gun resulting in great danger.
ALWAYS RELEASE AIR AND FLUID PRESSURE BEFORE CLEANING,
DISASSEMBLING OR SERVICING. Otherwise, remaining pressure can cause
bodily injury due to improper operation or scattering cleaning liquid. To release
pressure, first shut off the supply of compressed air and fluid to the spray gun.
Then squeeze trigger, while the spray is pointed in a safe direction.
NEVER POINT Spray Gun towards people or animals.
TIP OF FLUID NEEDLE SET HAS A SHARP POINT.
Do not touch the tip during maintenance to prevent injury
NEVER USE THIS GUN TO SPRAY FOODS OR CHEMICALS. Otherwise,
foreign substance, could cause corrosion of fluid passages which could
adversely affect health.
NEVER ALTER THIS SPRAY GUN. If done, it can cause insufficient perfor-
mance and failure or in extreme cases, explosions.
WARNING
OTHER PRECAUTIONS
SECURELY CONNECT FLUID HOSE or SUCTION CONTAINER. If fluid hose or
suction container are not properly connected during operation, hazardous hose
movement and paint ejection will cause severe bodily injury.
IF SOMETHING GOES WRONG, IMMEDIATELY STOP OPERATION AND
FIND THE CAUSE. Do not use again until you have solved the problem.
DO NOT ENTER WORKING AREAS, WHERE ROBOTS, RECIPROCATORS,
ETC. ARE USED, UNTIL THEY HAVE BEEN TURNED OFF. Otherwise, they
could cause injury.
NEVER USE SPARE PARTS THAT ARE NOT ANEST IWATA ORIGINALS.
USE NEUTRAL CLEANER: pH value shall be 6 to 8, otherwise could cause
corrosion.
PRODUCT CHECKING
IMPORTANTE
5
WHEN YOU RECEIVE THE SPRAY GUN AFTER PURCHASE, MAKE SURE
THAT THE PRODUCT RECEIVED COMPLIES WITH THE ORDER THAT
HAS NOT BEEN DAMAGED DURING TRANSPORTATION OR STORAGE.
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido