Function Buttons - SSS Siedle DCSF 600-0 Manual De Programación

Switching input programming
example
If switching input 1 is activated
by pressing a button, a call is to
be made to a call number and the
DCSF relay 1 switched on for 5 sec-
onds so that a buzzer sounds briefly,
for example.
Procedure
Navigate to the Input configuration
menu.
Press the OK button.
Use the scroll buttons to select the
required switching input and press
OK to confirm.
Press the OK button.
Enter the active call number.
Please also enter system-specific
prefixes (e.g. "0").
Press the OK button.
Use the scroll buttons to switch to
the next function.
Press the OK button.
Enter active function according to
the function table (see DCA... pro-
gramming instructions) (e.g. #211
-> switch on DCSF relay 1).
Press the OK button.
Once programming is complete,
press the ESC button several times.
10
The switching input 1 must also be
configured with the "Timer" func-
tion in the "Output configuration"
menu, so that the DCSF relay 1
responds to the switching com-
mand from switching input 1.
Function button(s)
OK
OK
OK
OK
OK
OK
ESC
Display indicator
Input config.
change with
Input
change with
Act. call no.
change with
Act. call no.
–
Act. call no.
00772112345678
Act. call no.
change with
Act. fct.
change with
Act. fct.
–
Act. fct.
#211
Act. fct.
change with
DCA 650-02
S. SIEDLE & SÖHNE
<ok>
1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
E1
<ok>
V 2.x