Switching output programming
example
Switching output 1 is config-
ured with a timer function and
a switching value of 5 seconds
according to the previous example.
Procedure
Navigate to the Output configura-
tion menu.
Press the OK button.
Use the scroll buttons to select the
required switching output and press
OK to confirm.
Use the scroll buttons to select the
required function.
Press the OK button.
Use the scroll buttons to switch to
the function-dependent time set-
ting.
Press the OK button.
Use the scroll buttons to select the
required time.
Press the OK button.
Once programming is complete,
press the ESC button several times.
In the case of a manual trigger,
relay output 1 closes the contact for
5 seconds and then returns to idle
status again.
Function button(s)
OK
OK
OK
OK
OK
ESC
Display indicator
Output config.
change with
Function outp.
change with
Function outp.
change with
Function outp.
Timer
Function outp.
change with
Time output
change with
Time output
0,4s
Time output
5s
Time output
change with
DCA 650-02
S. SIEDLE & SÖHNE
<ok>
1
<ok>
1
<ok>
1
<ok>
1
<ok>
1
<ok>
1
<ok>
1
<ok>
1
<ok>
V 2.x
11