Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting
1.
Connect the water tap connection of the watering system computer direct-
ly to the desired water tap.
2.
Connect the hose of the desired watering system to the water outlet (hose
connection) using a suitable connector.
3.
The device is now ready for use.
6. Initial use
Defining the start time
Adjust the start time for watering after connecting the watering system computer
to the tap and the hose of the watering system.
1.
Press the Menu button twice. START flashes on the display. Open the
settings by pressing the OK button.
2.
Use the dial to set the value for the start time. First set the hours. Confirm
using the OK button. Then set the
minutes. Turn it left to reduce the value or turn it right to increase the
value. Confirm using the OK button.
Defining the watering duration
After setting the start time, the hour display of watering duration (Run Time)
starts flashing.
1.
Adjust the watering duration using the dial. Turn it left to reduce the value
or turn it right to increase the value. First select the hours. Confirm using
the OK button.
2.
Then adjust the minutes of run time. Confirm using the OK button.
Note: The run time can be set to a maximum of 240 minutes (4 hours).
English
15
Publicidad
