Brandson Equipment 304257 Manual Del Usuario página 16

Defining the watering cycle
After adjusting the start time and watering duration, you can define the watering
cycle.
The following watering cycles are available:
• every 6 hours,
• every 12 hours
• on any selected days of the week.
The display shows a water drop symbol on the right side (
time (Run Time) is set.
You can adjust the watering cycle using the two "Increase value" and "Decrease
value" arrow keys. The current setting is shown in the display using the water
drop symbol.
You can also select multiple days by selecting the day using the "Increase value"
and "Decrease value" arrow keys and confirming by pressing the OK button. The
water drop symbol (
Enabling the program
The display shows "PROG" once the watering cycle is configured. You have the
option of enabling the program (On) or disabling it (Off).
Use the dial to choose between the two options and confirm by pressing the OK
button.
• When enabled, the display shows the water drop symbol (
previously configured cycle. The symbol disappears once the program is
disabled.
16
) is shown for the selected days.
) after the watering
) of the
English