Haier QWR04D R Serie Instrucciones De Instalación Y Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION
WARNING
EXPLOSION HAZARD
Keep flammable materials and vapors away from appliance. Failure to do so can result in fire, explosion, or death.
WARNING
FIRE OR EXPLOSION HAZARD Flammable Refrigerant
This appliance contains isobutane refrigerant, also known as R600a, a natural gas with high environmental
compatibility. However, it is also combustible. Adhere to the warnings below to reduce the risk of injury or property
damage.
1. When handling, installing and operating the appliance,
care should be taken to avoid damage to the refrigerant
tubing.
2. Service shall only be performed by authorized service
personnel. Use only manufacturer-authorized service
parts.
3. Dispose of appliance in accordance with the Federal
and Local Regulations. The flammable refrigerant and
insulation material used in this product require special
disposal procedures. Contact your local authorities for
the environmentally safe disposal of your appliance.
4. Keep ventilation openings in the appliance enclosures or
WARNING
Electrical Shock Hazard.
Plug into a grounded 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the possibility of electric
shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
If you have only a standard 2-prong wall outlet, it is your
personal responsibility and obligation to have it replaced
with a properly grounded 3-prong wall outlet.
NOTE: GFI (ground fault interrupter) is not
recommended.
The appliance should always be plugged into its own
individual electrical outlet which has a voltage rating that
matches the rating plate.
49-1000564 Rev. 0
INSTALLATION
in the built-in structure clear of obstruction.
5. To remove frost, scrape with a plastic or wood spatula or
scraper. Do not use an ice pick or a metal or sharp-edged
instrument as it may puncture the appliance liner and
then the flammable refrigerant tubing behind it.
6. Do not use electrical appliances inside the storage
compartment of the appliance.
7. Do not use any electrical device to defrost your
appliance.
CONNECTING ELECTRICITY
Do not use an extension cord with this appliance.
Failure to follow these instructions can result in death, fire,
or electrical shock.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires.
Never unplug your appliance by pulling on the power cord.
Always grip plug firmly and pull straight out from the outlet.
Immediately discontinue use of a damaged supply cord.
If the supply cord is damaged, it must be replaced by a
qualified service professional with an authorized service
part from the manufacturer.
When moving the appliance away from the wall, be careful
not to roll over or damage the power cord.
READ AND SAVE THESE INSTRUCTIONS
5

Publicidad

Tabla de contenido
loading

Tabla de contenido