Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1:
Prepare Installation Area by Removing the Front Cover from Zoneline Unit
(if applicable)
WARNING
the service panel and lock the area to prevent power from being switched on accidentally.
Note: Record all Aux Mode settings before beginning this project.
1. Remove power from unit and remove the Front cover.
Nomenclature Example
AZ45E09DABW5
STEP 2:
Remove Vent Grille from Zoneline Unit
1. Remove and retain the four 5/16" screws securing the air louver. Note orientation of louver for replacement.
2. Remove louver and set aside.
Installation Instructions
Engineering Revision - Must be 5 or higher
2
Publicidad
