Launch Creader 629 Guia De Inicio Rapido página 3

Register & Update
Prerequisite conditions:
1. Go to http: www.x431.com //
and install it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.
Follow the steps below to update the tool:
1. Note down the Serial Number and Register code.
1).Connect one end of the USB cable to your tool, and the other
end on the computer.
2). After the tool has powered up and entered the main menu
screen, move the highlight bar on the "Help" icon and press
[OK].
3/5
3). Highlight the "Tool Information" in Fig. 1 and press [OK].
4). Write down the Serial Number and Register code for later use.
2. Register the scanner on the update tool.
1). Launch the update tool, a screen similar to Fig. 3 will appear:
Select Language
Product Serial Number
*Note: Once the S/N is entered, "Restore System" becomes activated,
which is used to restore system if a new memory card is replaced.
2).Select the target language and enter the Product Serial
Number, click [Device Upgrade], a screen similar to Fig. 4 will
appear.
/CR629 to download the update tool
Help
DLC Location Information
Abbreviation
Tool Information
About OBD
Upgrade Information
Tool Information
Boot version:
Display program version:
Diagnostic program version:
Diagnostic library version:
Serial Number:
Register Code:
English
1
2
V02.01
V02.00
V10.50
V02.24
964890000012
270025000247
3
Device Upgrade