LF Millennium 69P1 Instrucciones Y Mantenimiento página 48

Use and maintenance manual | Series MILLENNIUM
RAPID CONTROL OF REGENERATION PHASES
To manually start a regeneration process and monitor the correct operation of the individual phases of the black-
out cycle, follow the instructions:
Press and hold the buttons at the same time
pad is unlocked..
Press the button and a complete regeneration process will immediately start.
If you wish to proceed directly to a subsequent regeneration phase, press the button
2.3 Stop
The system can be stopped as follows:
TEMPORARILY
• Disconnect the power socket and activate the by-pass.
• Disconnect the connection pipes.
• Empty the salt water tank and wash it internally.
• Clean the softener and store it in a dry, weather-proof and exclusively accessible place (do not leave it
within the reach of children or unauthorized persons).
CONCLUSIVELY
In addition to temporary decommissioning the operations, the following are also planned:
• Pack the machine with cardboard, polystyrene or other materials and inform the appropriate personnel
(authorised waste disposal or used take-back).
48
for 5 seconds until you hear the beep and the key
.