OutBack Power GTFX Serie Manual De Programación página 39

2. With the FXs connected to the HUB, turn only the DC breakers ON and power up the components. All AC
breakers should be OFF.
BYPASS OUTPUT INPUT
AC Breakers Off
LED Color LED Action
green Solid grEEN
Flashing grEEN
Off
yellow Solid yELLOw
Flashing yELLOw
Off
red Solid rED
Flashing rED
Note: Powering up the FXs can cause the red ERROR
STATUS light to blink. After 5-10 seconds, the green
INVERTER light should be bright and the ERROR and
AC IN lights dark. The FX is now producing AC output
voltage.
DC Breakers On
LED Indicates
Inverter ON
Search mode or Slave Power
Inverter OFF
AC Source is Connected
AC Input Live-waiting to
Connect to the FX
No AC Input Present
Error: Error message, dis-
plays on the mATE
warning: Non-critical FX
fault. The mATE can access
this information
37