BLACK&DECKER KS4000 Manual De Instrucciones página 5

For continuous operation, press the lock-on button (2) and
x
release the on/off switch.
To switch the tool off, release the on/off switch.
x
To switch the tool off when in continuous operation, press
the on/off switch once more and release it.
Hints for optimum use
Sawing laminates
As the saw blade cuts on the upward stroke, splintering may
occur on the surface closest to the shoe plate.
Use a fine-tooth saw blade.
x
Saw from the back surface of the workpiece.
x
To minimise splintering, clamp a piece of scrap wood or
x
hardboard to both sides of the workpiece and saw
through this sandwich.
Sawing metal
Be aware that sawing metal takes much more time than
x
sawing wood.
Use a saw blade suitable for sawing metal.
x
When cutting thin sheet metal, clamp a piece of scrap
x
wood to the back surface of the workpiece and cut
through this sandwich.
Spread a film of oil along the intended line of cut.
x
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Power input
Number of strokes (no load)
Max. depth of cut
Wood
Steel
Aluminium
EC declaration of conformity
KS400/AST40
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN 61000
L (sound pressure) 88 dB(A), L
pA
hand/arm weighted vibration 6.5 m/s
K (sound pressure uncertainty) 3 dB(A),
pA
K (acoustic power uncertainty) 3 dB(A)
WA
Spennymoor, County Durham DL16 6JG,
ENGLISH
KS400 AST40
W 450 450
min -1 800 - 3,100 800 - 3,100
mm 55 55
mm 3 3
mm 8 8
(acoustic power) 99 dB(A),
WA
2
Kevin Hewitt
Director of Consumer Engineering
United Kingdom
1-2-2006
5