HSM Powerline HDS 150 Manual De Instrucciones página 21

Checking the lid switch
• Open the flap.
After you have closed the flap, the indicator goes
off and the status bar lights up red. The machine
can be put back into operation.
Checking the tray switch
• Pull out the drawer.
After you have closed the drawer, the indicator
goes off and the status bar lights up red. The
machine can be put back into operation.
01/2018
 The "Flap open" dis-
play must appear, the
status bar turns red, and
the LEDs flash red.
 The "Drawer open"
display must appear, the
status bar turns red, and
the LEDs flash red.
HSM Powerline HDS 150
5 Operation
Switching the hard drive shredder on
• Turn the main switch to position I.

Hard drive
Hard drive or CD/DVD or magnetic tape
• If you want to process material of
the displayed type again, press the
"forward" button. Otherwise select
a different material type (see Chap-
ter 6, "Menu settings").
indicate that the shredder is not ready for use
yet. Do not add any more material.
english
 The display shows the
material type selected
before the last shutdown:
 In the display field, the
destruction of the data
carrier is animated. How-
ever, the hand symbol
and the red status bar
 After a short time, the
display changes. The
status bar and the LED in
the control panel are
green. The machine is
now ready to operate.
Now you can add mate-
rial.
21