Wagan Tech 2450 Manual De Usuario página 8

Cordless Spotlight Compressor™ by Wagan Tech®
Using as a DC 12 V Power Source
• The compressor's 12 V DC Power Socket mimics the 12 V socket of a
vehicle.
• Any accessory you would normally plug into your vehicle's 12 V socket
(cell phone, digital camera, flashlight, radio, etc.) can be powered
from the compressor's 12 V socket, using the compressor's built-in
battery as the power source.
• This unit's 12 V DC socket is center pin positive (+). Most 12 V DC
accessories come with this configuration, but not all. Before connecting
any accessory to the compressor's 12 V socket, check the accessory
owner's manual for the polarity of the accessory.
• If the accessory is center pin positive, simply plug it into the 12 V
socket.
• For the DC accessories that are NOT center pin positive, you must use
a DC to DC adapter (not included).
Using the Spotlight or the LED reading light
A. Spotlight: locate the on/off switch on the handle of the unit. Change it
from "O" to "I" position.
B. LED Reading light: locate the on/off switch on the handle of the unit.
Change it from "O" to "II" position.
Note: The halogen and LED bulbs are not designed to be removed by
users. DO NOT attempt to change or modify them.
7
www.wagan.com