Cleaning And Care - Brizo SENSORI T66T0 Serie Guia De Inicio Rapido

2
Maintenance
If you notice reduced flow or the outlet
temperature fluctuating, the cartridge screens
may need cleaned. To clean the cartridge
screens: Shut off water from the main valve
or from stops (1). Remove the handle (2), trim
ring (3), trim sleeve (4), escutcheon (5) (if using
stops) and unscrew bonnet nut (6). Carefully
pull cartridge and sleeve assembly (7) from the
valve body (8). Carefully brush or wash away
any debris that may be on the screens (9). After
cleaning, reinstall cartridge and sleeve assembly
back into the valve body, making sure to align
the "V" (10) on the sleeve with the "V" groove
(11) on the valve body (Note the "UP" on the
sleeve). Secure cartridge and sleeve assembly by
screwing the bonnet securely onto the valve body.
Turn the stops on, and reassemble remaining
parts.
90411 Rev. B
4
3
6
7
6
5

Cleaning and Care

Care should be given to the cleaning of this
product. Although its finish is extremely durable,
it can be damaged by harsh abrasives or polish.
To clean, simply wipe gently with a damp cloth
and blot dry with a soft towel.
11
10
1
10
8
1
9