Control Panel - Krups Beertender VB2158 Manual Del Usuario

CONTROL PANEL

Your appliance features a display providing you with important and useful
n
information.
Two LEDs on the top of the lid provide important indications:
n
- Green (ON/OFF) LED on the left of the panel: when lit, it indicates that the
- Green beer-temperature LED on the right side of the panel: when the
wArNING:
86°F. Above that level, the ideal serving temperature can not be attained.
POURING A BEER FROM THE BEERTENDER
Before pouring a beer, rinse a clean glass in cold water which chills the
n
glass and wets the inside to enable a perfectly smooth draught pour. Use
of 8 oz glasses is recommended to maintain the ideal serving temperature
- fig. 17.
DRAUGHT AND DRINK
Be aware that the first glass you pour from every new DraughtKeg
n
contain mostly foam. This is typical of draught beer. Allow the foam to settle
and continue to pour.
Tilt and pour: Tilt your glass at a 45 degree angle as you pour and adjust
n
upright as the glass fills - fig. 18.
Ensure you pull the tap handle all the way down. Not opening the handle all
n
the way will result in excessive foam.
For the optimal draught beer drinking experience, serve your beer with a
n
foam head of 2 fingers in height (approximately 1.5").
PROPER CARE AND CLEANING OF YOUR BEERTENDER
The drip tray and grate should be emptied and cleaned after each use
n
- fig. 19.
Before cleaning the appliance, it is essential to turn off the ON/OFF switch
n
and then pull the plug out of the socket.
Keep in mind that during use the drip tray will have to be emptied and rinsed
n
regularly. The tray and grate are dishwasher safe or can be washed by hand
with a mild detergent. Dry completely.
Always wipe down the interior of the BeerTender
n
is a natural product that can spoil. Therefore, you should always keep the
appliance clean to maintain the quality of the beer dispensed and avoid
unpleasant odors.
otice_krups_beertender_nafta.indd 7
appliance is operating - fig. 15.
DraughtKeg has reached the ideal temperature the LED switches on and
TM
the appliance goes into "stand-by" cooling mode - fig. 16.
never use your BeerTender with ambient temperature above
®
after use - fig. 20. Beer
®
English
®
will
TM
®
7
10/08/10 11:49:12