Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
10
Solving problems
The suction power is insufficient:
1
Check if the suction power control is in the required position (see the section on vacuum
cleaning - adjusting suction power).
2
Check if the dustbag is full. If necessary, replace the dustbag.
3
Check if the filters need to be replaced.
4
Check if the nozzle, tube or hose is blocked up.
5
To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible)
in reverse position. Switch the vacuum cleaner on to make the airflow suck the obstructing
material out of the blocked-up item.(fig.30)
Information & service
If you need information or if you have a problem, please visit the Philips Web site at www.philips.com
or contact the Philips Customer Care Centre in your country (you will find its phone number in the
worldwide guarantee leaflet).
If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and Personal Care BV.
Publicidad
Tabla de contenido
