Machine Information; Technical Specifications - VONROC VC504AC Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm². When using a cable reel
always unwind the reel completely

2. MACHINE INFORMATION

Intended use
The vacuum cleaner is intended for domestic wet
and dry vacuuming in, for example, the house,
work room, car or garage. The vacuum cleaner is
equipped with a blowing function. It can be used to
blow dust and debris. The device is not suitable for
commercial or industrial use.

TECHNICAL SPECIFICATIONS

Model No.
Mains voltage
Mains frequency
Power input
Max. device socket power
Max. total power
Cable length
Protection category
Suction force
Container capacity approx.
Useful volume dry approx.
Useful volume wet approx.
Filter - dry
Filter - wet
Hose system
Diameter intake port (29 Fig. D) Ø52mm
Recommended dust bag
Weight (incl. all accessories)
approx.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-4.
1. On l / off 0 / ll automatic mode switch
2. Carrying handle
3. Blowing port
4. Power cord storage
WWW.VONROC.COM
VC504AC
220-240V~
50-60 Hz
1.400W
2.000W
3.400W
6m
IPX4
20 kPA, 1.8 m3/min
20 L
15 L
12L
HEPA filter
Foam filter
Ø32mm
VC805AA
7.4kg
5. Filter-cleaning button
6. Top section
7. Locking clamp
8. Container
9. Base
10. Wheels
11. Castor wheels
12. Drainage outlet
13. Drainage outlet cap
14. Vacuum port
15. Power socket with automatic on/off control
16. Nozzles storage
17. Hose
18. Handle adapter
19. Removable handle
20. Suction tubes
21. Wet and dry floor nozzle
22. Round brush nozzle
23. Crevice nozzle
24. Car vacuum tool
25. Power tool adapter
26. Dust collection bag
27. HEPA filter
28. Foam filter
29. Intake port
30. Float
31. Filter cage
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
1. Press the container (8) on the base (9) as
shown in Fig. B. Make sure the base (9) is
securely fastened.
2. Fit the filter (27,28). Ensure to mount the cor-
rect filter, depending on the application:
• For dry vacuum cleaning, carefully slide
the HEPA filter (27) over the filter cage (31)
making sure the entire cage (31) is covered
as shown in Fig. C-1.
• For wet vacuum cleaning, carefully slide
the foam filter (28) over the filter cage (31)
making sure the entire cage (31) is covered
as shown in Fig. C-2.
3. Place the top section (6) on the container (8).
4. Connect the suction hose (17).
• For vacuuming (Fig. E-1), connect the suc-
tion hose (17) to the vacuum port (14).
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido