OBJ_BUCH-836-003.book Page 15 Monday, March 30, 2009 10:50 AM
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for drilling in wood,
metal, ceramic and plastic. Machines with elec-
tronic control and right and left rotation are also
suitable for screwdriving.
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Rated torque
Spindle collar dia.
Speed control
Right/left rotation
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch
8 Screwdriver bit*
9 Universal bit holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
GBM 6 RE
Professional
3 601 D72 5..
W
350
W
136
-1
min
0 – 4000
-1
min
3116
Nm
12.3
mm
43
mm
6.5
mm
15
mm
mm
1 – 10
kg
1.2
/II
2 609 140 654 | (30.3.09)
English | 15
GBM 6 RE
Professional
3 601 D72 6..
350
136
0 – 4000
3116
12.3
43
6.5
15
8
8
1.5 – 10
1.2
/II