KTM Power Parts 93012927044 Manual De Instalación página 5

Scope of supply
1x back plate
1x rubber support
1x upper retaining bracket, left
1x upper retaining bracket, right
1x lower retaining bracket, left
1x lower retaining bracket, right
2x bushing thick
2x bushing thin
4x collar screw M8x35
4x quick lock cpl.
4x countersunk screw M6x16
4x hexagon nut M6
Preassembly
- Mount quick lock plates
and on the right lower retaining bracket
- Position the left and right
on the lower retaining brackets.
- Mount and tighten quick lock screws with washers
- Mount rubber support on the back plate
Assembly
- Remove left and right screws
on the left lower retaining bracket
(all included).
upper retaining brackets (all included)
(all included).
(all included).
.
5