Connecting Tv With S-Video/Component Jack, Amp With Digital Audio Out Jack; Progressive Scan - Polaroid DVC-2000 Manual Del Usuario

Connecting TV With S-VIDEO/Component Jack, AMP With Digital Audio Out jack

How to Connect(DVD only)
1 Connect S-VIDEO OUT or COMPONENT OUT to TV.
2.Connect analog AUDIO OUTPUT(L/R) jack to TV.
3 Connect COAXIAL or OPTICAL to AMP of Dolby Digital.

Progressive Scan

WHAT IS PROGRESSIVE SCAN?
With the introduction of Digital/High-Definition TV, televisions can scan viewable information at double the frequency of standard
NTSC televisions. This provides for greater picture clarity and detail. This player provides the delivery of images to these newer
televisions with greater detail and film like quality. Connect the player to your HDTV ready television using the component video
inputs/outputs.
HOW TO SETUP THE VIDEO SCAN MODE?
Connect this Player with Y, Pr and Pb, if your TV has Progressive Scan and Component Video input.
Press I/P button on remote control unit to switch between Interlace & Progressive Scan mode.
It is forbidden by law to copy, broadcast, show, play in public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
Manufactured under license from Dolby Labs.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
c 1992-1997 Dolby Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
D V C - 2 0 0 0
9