Search Function - Polaroid DVC-2000 Manual Del Usuario

Recording
One Touch timer Recording(OTR)
One-Touch Recording(OTR) allows you to record in 30-minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on "Recording".
2 Activate OTR
While in Record mode, press the REC button again to activate One-Touch Recording(OTR).
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute increments up to 4 hours.
•The VCR&DVD PLAYER stops recording automatically when the time has elapsed.
4 Press button to stop recording mode.

Search Function

Search Counter Zero
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the "Search", and press ENTER
button.
3. Press ENTER button at "Go To Zero Search" to start.
Search Counter
•Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the "Search", and press ENTER
button.
Search Index Forward/backward
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
2. Press the button to select the "Search", and press
ENTER button.
3. If your search is forward direction, highlight "Index
Search(+)" Index searching motion, then press ENTER button.
Search Index Number
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2. Press the button to select the "Search", and press ENTER
button.
3. Press the button to select the "Index Number Search ",
and press ENTER button.
D V C - 2 0 0 0
(continued)
• AS soon as the counter searches 0:00:00 , the tape will play
automatically.
3. Press the button to select the "Counter Search", and press
ENTER button.
4. Enter the desired time and press ENTER button.
• The counter appears on screen and the LED.
4. If your search is backward direction, highlight "Index
Search(-)" Index searching motion, then press ENTER button.
• The index signal is recorded on the tape automatically when
the recording is started. You can view a recording at a specific
start point.
4. Index NUMBER setting method.
• If your search is forward direction, press up
desired Index Number.
• If your search is reverse direction, press down
select desired Index Number.
5 After setting up , Please Press ENTER Button.
button to select
button to
11