Vcr Setting - Polaroid DVC-2000 Manual Del Usuario

VCR Setting

Clock
• Press VCR button to change into VCR Mode and follow the
procedures below.
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
3 Set the current date and time with
Program
1 In VCR mode press the SETUP button on the remote control .
2 Press the button to select the "Program Set" and press
ENTER button.
3 Select "Channel"
• move into desired channel signal with up
channel signal change like the orders below.
cable video 1
4 Select "Start Date"
• Move into "Start Date "with
desired number to record with up/down button or number button
5 Select "REC cycle".
• Move into "REC Cycle" with
desired one with up/down button
• REC cycle changes like the orders.
One Time weekly
6 Select Start Time
Channel
• Only operating in stop mode.
• Press VCR button to change into VCR mode and follow the
procedure below.
1 Press the SETUP button on the remote control.
2 Press the button to highlight and select (Enter) the
"Channel Set".
3 Selecting cable or antenna viewing
• You must set the viewing mode for your VCR, choosing either
CABLE (cable system connection) or ANTENNA(antenna
connection). To set the viewing mode:
• Press ENTER to toggle between CABLE and ANTENNA.
4 SELECT "Manual Set"
Move into "Manual set" with
erase with ENTER button. Memorize channel and select the
desired channel when ENTER button is pressed, "Erase"
converts into "Add".
On-Screen Menu Language
1 Press the SETUP button on the remote control. The initial
MENU is displayed.
2. Press the button to select the "Language Select" and
12
button or
/down
video 2 Antenna
button and then, select the
button and then, select the
weekdays Daily
button to select one of add and
NUMBER button.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press SETUP button after completed.
• Move into "Start Time" with
desired number to record with up/down button or number
button.
7 Select End time
• Move into "End Time" with
button
desired number to record with Up/down button or number
button.
8 Select Tape Speed
• Move into "Tape Speed" with
desired one with up/down button
• Recording speed changes like the orders below.
SP SLP
• Press SETUP button to exit after completion.
• Press NEXT and PREV button to fisnish 8-event programming.
• Press the POWER button to activate timer recording.
Press NUMBER button and
select the desired channel to memorize.
To check the memorized channels, press CH+/- button on
remote control. To delete Channels Manually, when ENTER
button is pressed, "Add" converts into "Erase". Press NUMBER
button and /
desired channel to delete.
To check the deleted channels, press CH+/- button on remote
control.
5 SELECT "Auto Preset"
• Press button in Channel Set to highlight "Auto Preset"
• Press ENTER button to detect the channel automatically.
press ENTER button
3 Select the language among English, Spainish and French.
button and then, select the
button and then, select the
button and then, select the
/ button of remote control to
button on the remote control to select the
D V C - 2 0 0 0