i-station sound Bar (WIs030) – En user Manual
Thank you for purchasing the logic3 i-station sound Bar. As with all logic3 products it has been built to the highest
manufacturing standards and tested throughout its development, to ensure you get the best possible product. Please read
through and familiarize yourself with this manual before you use the i-station sound Bar.
contents
i-station sound Bar
AC Adapter with
interchangeable Plugs
(Euro 2pin and Bs 3pin)
Product overview
Front
Dock Connector
Mood light
lCD
lcD Display
source
Time/Radio
Frequency Display
Back
Video/Audio
connections
Video Ouput
switch
FM Antenna
EQ
Composite Video
Remote Control
Battery X2
Cable
(CR2025)
Mood light
EQ settings
AC Adapter socket
Aux1 input
2
Battery Back up
The i-station sound Bar has a Back Up battery to retain the clocks settings in case of a Power shortage.
1. Remove the battery lid from the bottom of the i-station sound Bar.
2. insert the battery (supplied).
WARNING: Please ensure that the batteries are inserted correctly. If the batteries are inserted incorrectly (re-
versed polarity), this may cause personal injury as well as damage to your i-Station Sound Bar.
3. Replace the battery lid.
Base of i-station soundBar
Note: The Battery back up will only retain the clocks memory; it will not illuminate the clocks display.
set up of i-station sound Bar
1. select and fit the correct plug adapter to suit your power supply.
2. Connect the mains AC Adapter to the i-station sound Bar (DC 18V)
3. Plug the power supply into your mains socket and switch the mains socket On
1
4. Pull the iPhone/iPod connector forward
, dock the iPhone/iPod
automatically).
5. Once the iPhone/iPod is docked onto the i-station sound Bar the back of the iPod/iPhone will rest on the rubber pad of
the i-station sound Bar.
1
CR2025
3V
2
(iPod/iPhone will play the last selected song
2
3