Logic3 WIS030 Manual Del Usuario página 6

set up of aux 1 / aux 2
The i-station sound Bar also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc
and Portable CD Players to be connected via the Auxilary 1 / Auxilary 2 inputs for use as a speaker system.
aux 1
1. Plug in the line in cable (not supplied) into the rear of the i-station sound Bar Aux 1 socket.
2. Connect the other end of the line in cable to your devices headphone socket.
3. set your device volume to Maximum.
4. Turn on your i-station.
CD
MD
MP3
MiniDisc
Note: Remember to remove the line in cable when not using the i-Station Sound Bar via line-in, as the line in
cable will override any sound coming from the docking station.
aux 2
1. Plug in the left/Right RCA cable (not supplied) into the side of the i-station soundBar input Aux 2 socket.
2. Connect the other end of the left/Right RCA cable to your Ouput l/R Audio Device.
3. Turn on your i-station.
AUDiO inPUT
lEFT/RigHT
selecting aux1/aux2 via the aPP
Once you have connected your Audio device to Aux1/Aux2 you can select either Aux1/Aux2 inputs on the App.
AUX-1
(3.5mm
line in)
AUDiO OUTPUT
lEFT/RigHT
10
The APP enables you to rename the Aux1 / Aux 2 titles:-
1 2
4 5
Mounting the i-station on a Wall
The i-station sound Bar can be wall mounted by using the hanging brackets.
Hanging Brackets
Warning: Please ensure the correct fixing screws are used in order to accomadate the weight of the i-Station
Sound Bar and to ensure that the i-Station is securely mounted.
3
1. select Aux 1 or Aux 2
2. Press on Aux 1
3. name can now be edited.
4. After editing the name,
Press 'save'
5. Edited name will now be
shown.
11