Remote Control Functions - Logic3 WIS030 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

setting the sleep Mode

The sleep time can be adjusted to the user's preference.

1. in any source mode Press and hold the 'sleep' button on the i-station sound Bar/Remote Control.

2. sleep time will be displayed on the screen, Preset on 'OFF'

3. Using the 'Tuning' buttons set the duration of the sleep mode (OFF, 15, 30, 45, 60)

4. Once you have selected your sleep time, a

slEEP

5. The display will automatically return to the current time display after 10 seconds.

6. The sleep time will be counted down, to show the remaining sleep time press and hold the 'sleep'button.

set up of Video connection

1. Remove the Audio/Video connection cover from the bottom left hand corner of the soundBar.

2. Connect the i-station sound Bar to your TV via either the Composite Cable (included) or a Component Cable (not included)

3. Ensure that you switch the Video Out on the back of the unit to the correct Video Output (Component/Composite).

COnnECTing C/V

(COMPOsiTE ViDEO)

ViDEO

Y/g

AV in

COMPOnEnT in

icon will be displayed on the bottom right of the display.

COnnECTing TO Y/Pr/Pb

(COMPOnEnT ViDEO)

Pb/B Pr/R

NOTE: It is important that after connecting

your i-Station Sound Bar to your TV, the TV

Output switch on the rear of the i-Station

Sound Bar is set correctly corresponding to

your Video connection.

to adjust the lcD / Mood light dimmer level

The i-station sound Bar works in conjunction with the downloaded App (logic3 i-station soundBar Wis030), which can

be downloaded via iTunes.

This application will allow you to set your lCD/Mood light dimmer levels on the speaker via the iPhone.

There are two ways to set your lCD/Mood light dimmer levels:-

1. Using the i-station sound Bar

A. Press the 'Dimmer' button on the i-station sound Bar / Remote Control, there are 3 levels of dimming. (High, Medi-

mum, low, lCD Off, Mood light Off)

2. Using the Wis30 soundBar App.